GYPSUM 1 페이지

본문 바로가기
DK FINECHEMICAL
DK FINECHEMICAL
사이트 내 전체검색

Gypsum Plaster

  • Hand plaster

    Gypsum based plasters are used for smaller areas as well as during renovation.
    They are stirred either by hand or with a machine and applied manually, usually with a trowel.
    Gypsum based hand or bonding plasters are less delayed than gypsum based machine plasters.

  • Spray plaster

    Gypsum based and gypsum-lime based machine spray plasters are mixed and applied in continuously working plastering machines.
    They are used for a highly efficient coating of walls and ceilings and applied in one layer (ca. 10 mm thick).
    Using MEICELL® Cellulose ether construction grades guarantees the necessary water retention, workability and sag resistance.

MEICELL® Viscosity(Mpas)
FMD-1263 45,000~55,000
MPK-70Z 63,000~77,000
FMD-3433 20,000~30,000
FMD-3434 25,000~35,000
FMD-3435 35,000~45,000
FMD-3443 30,000~40,000
FMD-3445 30,000~40,000
FMD-3446 35,000~45,000
FMD-3447 25,000~35,000
FMD-3448 35,000~45,000
FMD-3454 35,000~45,000
FMD-3455 35,000~45,000
FMD-3457 25,000~35,000
FMD-3458 25,000~35,000
FMD-3461 40,000~50,000
FMD-3463 45,000~65,000
FMD-3465 45,000~55,000
FMD-3466 35,000~45,000
FMD-3467 45,000~55,000
FMD-3468 40,000~50,000
FMD-3469 35,000~45,000
FMD-3634 25,000~35,000

Gypsum Skim coat

MEICELL® increaseincrease the binding strength and anti-slipping performance for excellent and improve mortar wetting property. Being slip resistance and having better open time is the key to better adhesive requirements of Skim coat. These improvements can only be gained through MEICELL®

MEICELL® Viscosity(Mpas)
FMD-3447 25,000~35,000
FMD-3634 25,000~35,000
MPK-25Z 20,000~30,000

Gypsum Filler/Joint Filler

Gypsum based joint filler are used for filling the joints between gypsum plasterboards or gypsum fiber boards. 
Gypsum based joint-fillers can only be used for interior applications.

Setting times vary considerably depending on the geographical region and application.

MEICELL® Viscosity(Mpas)
MPD-30Z 27,000~33,000
FMD-3545 25,000~35,000
FMD-3546 25,000~35,000
FMD-3553 35,000~45,000

Gypsum Compound

Gypsum based jointing compounds are used for filling the joints between gypsum plasterboards or gypsum fibre boards.
Gypsum based jointing compounds can only be used for interior applications. Setting times vary considerably depending on the geographical region and application.

MEICELL® Viscosity(Mpas)
FMD-3550 35,000~45,000
FMD-3557 15,000~25,000
대표번호 : +82-70-4333-0775   
주소 : (본사) DK FINECHEM, 212, Bldg,102, Yongsan the prime tower, 11, Wonhyo-ro 90-gil, Yongsan-gu, Seoul, Republic of Korea(04315)   
Copyright © DK FINECHEMICAL. All rights reserved.