CEMENT Repair Mortar
MEICELL® increase the binding strength and anti-slipping performance for excellent and improve mortar wetting properties.
Being slip resistance and having better open time is the key to better adhesive requirements of Repair Mortar.
These improvements can only be gained through MEICELL®
MEICELL® |
Viscosity(Mpas) |
MPK-80YS |
7,200~8,800 |
MPK-10ZS |
9,000~11,000 |
MPK-15ZS |
13,500~16,500 |
EMD-20ZS |
15,000~20,000 |
MPK-20ZS |
18,000~22,000 |
MPK-30ZS |
27,000~33,000 |
MPK-40ZS |
36,000~44,000 |
EMD-45ZS |
40,000~50,000 |
FMD-5253 |
10,000~20,000 |
FMD-5254 |
10,000~20,000 |
CEMENT General Mortar
MEICELL® offers a wide range of construction grades to ensure that for every conceivable situation the right product is available.
For General usage we offer modified and non-modified MEICELL® grades of both MHEC and HPMC.
in construction industry, these products are responsible for
- Water retention
- Consistency
- Adhesion
The homogeneity, stability and workability of all fresh mortars are improved by use of MEICELL® cellulose ethers.
MEICELL® |
Viscosity(Mpas) |
MPK-40ZS |
36,000~44,000 |
MEA-40ZS |
36,000~44,000 |
EMD-40ZS |
36,000~44,000 |
EMD-45ZS |
40,000~50,000 |
MPK-50ZS |
45,000~55,000 |
MEA-50ZS |
45,000~55,000 |
EMD-55ZS |
50,000~60,000 |
Poly Styrene Granule Insulation Mortar
MEICELL® contributes to an advantageous particle size distribution of the dried granules and fast filling of pressing moulds .
In combination with plasticising and other additives, it provides high green strength and shows excellent debinding behavior.
Together with MEICELL®
MEICELL® |
Viscosity(Mpas) |
FMD-2763 |
60,000~70,000 |
CEMENT Mansonly Mortar
Masonry mortar adhesives are used to build walls made from aerated concrete blocks, particularly polished lime sand bricks or clinkers.
Constructing such walls creates only small joints so the progress of construction work is faster and more efficient with this modern adhesion technology.
MEICELL® |
Viscosity(Mpas) |
FMD-1245 |
27,000~33,000 |
FMD-2325 |
10,000~20,000 |
FMD-2353 |
40,000~50,000 |
CEMENT Fire Proofing Mortar
MEICELL® increaseincrease the binding strength and anti-slipping performance
for excellent and improve mortar wetting property. Being slip resistance and having better open time is the key to better adhesive requirements of Fire Proofing Mortar.
These improvements can only be gained through MEICELL®
MEICELL® |
Viscosity(Mpas) |
FMD-5224 |
10,000~20,000 |
FMD-5225 |
10,000~20,000 |
CEMENT Plaster
MEICELL® offers a wide range of construction grades to ensure that for every conceivable situation the right product is available. For cement plaster we offer modified and non-modified MEICELL® grades of both MHEC and HPMC.
In construction industry, these products are responsible for
- Water retention
- Consistency
- Adhesion
MEICELL® |
Viscosity(Mpas) |
MPK-15ZS |
13,500~16,500 |
MPK-20ZS |
18,000~22,000 |
FMD-2353 |
40,000~50,000 |
FMD-2323 |
14,000~22,000 |
FMD-2326 |
7,000~13,000 |
FMD-2336 |
30,000~40,000 |
FMD-2343 |
40,000~50,000 |
FMD-2345 |
25,000~35,000 |
FMD-2723 |
15,000~25,000 |
FMD-2724 |
12,000~18,000 |
FMD-2725 |
18,000~22,000 |
FMD-2726 |
22,000~30,000 |
CEMENT Skim Coat (Liquid Type)
MEICELL® increase the binding strength and anti-slipping performance for excellent and improve mortar wetting property.
Being slip resistance and having better open time is the key to better adhesive requirements of Skim coat.
These improvements can only be gained through MEICELL®
MEICELL® |
Viscosity(Mpas) |
MPD-30ZS |
27,000~33,000 |
MPD-40ZS |
36,000~44,000 |
MPD-50ZS |
45,000~55,000 |
FMD-1324 |
36,000~44,000 |
CEMENT Skim Coat (Powder Type)
MEICELL® increaseincrease the binding strength and anti-slipping performance for excellent and improve mortar wetting property.
Being slip resistance and having better open time is the key to better adhesive requirements of Skim coat.
These improvements can only be gained through MEICELL®
MEICELL® |
Viscosity(Mpas) |
MPK-40Z |
36,000~44,000 |
MPK-50Z |
40,000~50,000 |
FMD-1247 |
30,000~40,000 |
FMD-1248 |
35,000~45,000 |
FMD-1249 |
30,000~40,000 |
FMD-1250 |
35,000~45,000 |
FMD-1252 |
35,000~45,000 |
FMD-1253 |
40,000~50,000 |
FMD-1254 |
40,000~50,000 |
FMD-1255 |
40,000~50,000 |
FMD-1256 |
40,000~50,000 |
FMD-1257 |
35,000~45,000 |
FMD-1258 |
35,000~45,000 |
FMD-1259 |
35,000~45,000 |
FMD-1260 |
35,000~45,000 |
FMD-1261 |
40,000~50,000 |
FMD-1262 |
40,000~50,000 |
FMD-1263 |
45,000~55,000 |
FMD-1264 |
45,000~55,000 |
FMD-1265 |
40,000~50,000 |
FMD-1273 |
70,000~80,000 |
CEMENT Tile CEMENT(CTA)
-
Workability
The lubricity of MEICELL® cellulose ethers improves workability, making spreading easier and increasing efficiency. Users also prefer the "feel" that cellulose products give to tile adhesives and grouts in the actual site.
-
Easy mixing without lumping
MEICELL® cellulose ethers as additives are vital when dry powder products are mixed by hand. The lubricating properties of MEICELL® cellulose ethers reduce friction between particles, saving time and making thorough dispersion easier.
-
Excelent water retention
MEICELL®Cellulose ethers increase the water retained by the adhesive, minimizing the amount absorbed by the substrate and by the tile.
This increased open time, and brings gains in productivity because the adhesive can be applied to a wider area. MEICELL® cellulose also can extend shelf life and pot-life of ready-mixed adhesives, prolonging their usefulness.
-
Enhanced adhesion and sagging resistance
MEICELL® cellulose products enhance adhesion, even at high ratios of water to solids, ensuring a better result and preventing sagging. MEICELL® additives can help your products resist sliding, a benefit that tile setters will appreciate.
-
Heat resistance
Heat resistance additives can be included in formulations using MEICELL® cellulose ethers to ensure that adhesives offer bonding strength after exposure to heat.
Please contact to sales team for product recommendation.
CEMENT Tile grout
Grouts are used to fill gaps between different types of tiles.
They can be applied in different widths and are available in many different colours.to keep shrinkage to a minimum,
MEICELL® Tile grout types are recommended. MEICELL® prevents excessive absorption of water into the substrate or the ceramic covering, giving enough time for rubbing and finishing.
MEICELL® |
Viscosity(Mpas) |
MPD-40YS |
3,600~4,400 |
MPD-10ZS |
8,000~12,000 |
FMD-2823 |
4,000~6,000 |
CEMENT Self-leveling(SL)
Self-levelling floor compounds are used to smooth and level concrete and cement based screed surfaces.
MEICELL® can be used as an underlay for tiles and carpets.
MEICELL® |
Viscosity(Mpas) |
FMD-2923 |
150~250 |
FMD-2924 |
350~450 |
FMD-2925 |
450~550 |
H-300 |
200~400 |
H-500 |
400~600 |
Extrusion
MEICELL® Cellulose ethers are versatile, water-soluble, and highly efficient binders with excellent burnout characteristics, for Extrusion they can work as the binder that gels at elevated temperatures to improve cohesion, increase green strength, and eliminate binder migration.
Our MEICELL® cellulose ethers are used extensively across many extrusion applications.
Generally they are formed from raw materials at room temperature and derive their typical characteristics through a sintering process at high temperatures.
They are characterized by their special properties such as a high temperature resistance, high mechanical and extrusion stability or low electric conductivity.
MEICELL® cellulose ethers are primarily used for the chemical engineering of high-performance ceramics as process auxiliary.
Depending on the application, specialMEICELL® grades are used.
Please contact to sales team for product recommendation
Extrusion Panel
Our MEICELL® cellulose ethers are used extensively across many extrusion applications.
Generally they are formed from raw materials at room temperature and derive their typical characteristics through a sintering process at high temperatures.
MEICELL® |
Viscosity(Mpas) |
MPK-70Z |
63,000~77,000 |
MEA-70Z |
65,000~75,000 |
MPK-80Z |
75,000~85,000 |
MEA-80Z |
75,000~85,000 |
ETICS/EIFS
- Increases Adhesion Strength
- Prolongs Open Time
MEICELL® Cellulose ether improves the workability and increases both adhesion and embedding of the net. In addition to the cement binder, emulsion powders must be added to ensure sufficient adhesion to the insulation board
MEICELL® |
Viscosity(Mpas) |
FMD-2353 |
40,000~50,000 |
FMD-2323 |
14,000~22,000 |
FMD-2723 |
15,000~25,000 |
MPK-70Z |
63,000~77,000 |
FMD-2346 |
25,000~35,000 |
FMD-2376 |
60,000~70,000 |
FMD-2356 |
40,000~50,000 |